Maybe you're shifting into a new place or thinking about renovating your space. But there's one thing that's in the way - choppy and damaged paint. There starts the real struggle - removing the paint.
Removing paint can become a tiresome task to do. With the procedure, you can potentially damage your base furniture or walls. However, is it unavoidable? Absolutely not. We've concluded that the best way to remove paint is by using an orbital sander through hours of research.
Therefore, by the end of the article, we'll make sure you know how to use an orbital sander to remove paint like a professional. With the proper usage of an orbit sander, you won't have to go through any trouble.
So, without further ado, let's start!
How to Use a Sander to Remove Paint - Step by Step Procedure
In this article, we've prepared a step by step procedure of everything related to removing paint, A to Z. Try to follow through with all the steps carefully and thoroughly. By doing so, you'll eliminate the chances of ending up with an undesirable result.
Step 1: Take Proper Safety Precautions
Although the orbit sander isn't a dangerous tool, it can be- only if you don't take the precautions properly. Therefore, make sure to wear safety goggles, earplugs, and a mask.
Also, don't forget to clear out your workspace—Tape the adjacent rooms, so that dusting doesn't enter. Replace the orbital sander pads for paint removal for perfect application. Keep a vacuum cleaner by your side for instant cleanups.
Step 2: Determining the Base
When you start sanding, there are some prerequisites. And the most important one is discovering the base underneath the paint. Just remember one thing - never use a chemical paint remover for anything other than molded baseboards.
Opt for using a sander. A sander can strip off the paint to determine the base with ease. It will also ensure that your base isn't damaged in any way. To use an orbital sander to remove paint from concrete is the best and the most convenient option.
Step 3: Preparing the Surface
When it comes to prepping the surface for using an orbital sander, you'll have to go through three steps-
- Clean the Base
Almost every orbital sander for wood paint removal requires a good cleanup. You can clean the surface with either a grease-cutting cleaner or any all-purpose cleaning agent.
Thoroughly clean the surface, and make sure to give it a good night's rest to dry.
- Tape the Boundaries
Just mark out the area you want to apply paint on. To avoid sanding into undesirable spots, you can throw in some tape to mark the boundaries. In this way, the sander won't overdo the work.
- Apply Paint Remover Generously
After the previous two steps are complete, just apply some paint remover. It'll do its job naturally in a while. However, you can use a scraper to strip off stubborn paint if any is left after the chemical has done its work.
Step 4: Sanding It off
When you start sanding, you have to remember that there are different sizes of sandpaper. The difference in the grit sizing determines the kind of sanding you'll end up with.
The lower the grit sander, the rougher it'll be. The higher the grit number, the finer it'll sand. Therefore, make sure to have a 60-grit, 80-grit, and 150-grit sandpaper before sanding.
Firstly, use 60-grit sandpaper to cover a larger area at a faster pace. Work your way up to the 80 grit, and finally move onto 150-grit to smooth it out entirely.
The best sander for removing paint from metal generally has 80-gritted sandpaper. Different surfaces may require various sandpaper grit sizing.
However, for car paint removal, you have to go as far as up to 600-grit sandpaper.
Remember to vacuum every once in a while to avoid getting sawdust everywhere.
Step 5: Finishing the Procedure
Once you're done with the sanding, make sure to scrutinize the entire area. Maybe there are some imperfections. But that won't be an issue as they're all quite easily fixable.
Here are some tips to touch up your base after removing the paint-
- If there are any holes or cracks, cover them up with some putty.
- Make sure to use a pre-stain conditioner to help retain the color of the base without looking blemished.
- Prime the surface for varnish or polishing
Orbital sanders make stripping paint easily doable if used right. But there are many variations around the market. So, with proper research, make sure to go for the best sander for removing paint from cabinets, furniture, doors, etc.
And there you have it. By following these steps, you can achieve the optimal base for applying paint. If you were thinking, "Can I use an orbital sander to remove paint?" we hope by now you know it's the best way!
If you can pick out the best sandpaper grit for your base, the process can become much easier instantly. Knowing how to use a sander to remove paint may seem like a tedious thing to do at first. Although, by now, we utterly trust you to know everything about removing paint.
If you carefully follow the steps, undoubtedly, you'll reach your desired finishing without the help of an outsider. We hope the article has helped you in heaps. Till next time, stay safe!
Frequently Asked Questions (FAQs)
Which sander is the best for removing paint?
We've already established that it's the orbital sander.
Can I use belt sander to remove paint?
You can, but it's not a great option.
What grit should I start sanding with?
60 or 80-grit will be fine.
Hello, this is Gary Jae, a machinery expert. Writing is one of my hobbies, so I wanted to share my know-how about tools, technologies, machinery, and automotive equipment. I hope you’ll enjoy my provided real-life experience and analytic information.